top of page
GREASE PUMPS ACCESSORIES

Metal drum cover, Follower plate with rubber edge, Plastic bung adapter for fixation of pumps

128.png

Metal Drum Cover

Metal drum cover, available in different dimensions to suit to the various types of grease drums, including butterfly screws for the fi xation of the cover on the drum as well as bung adapter for the fixation of the pump in vertical position.

129.png

Follower Plate With Rubber Edge

Follower plate with rubber edge, available in different dimensions to suit to the various types of grease drums. The follower plate causes a constant grease level inside of the drum and helps to avoid any air pockets inside of the grease close to the suction tube as well as any disposals of grease on the inner surface of the drum.

130.png

Art. 4328

Plastic bung adapter for fixation of pumps, 2” BSP (M) x 28 mm.

Art. 4340

Plastic bung adapter for fixation of pumps, 2” BSP (M) x 40 mm.

Art. 4341

Plastic lock ring for bung adapter, 2” BSP (M), for art. nos. 4328 and 4340.

Art. 4326

Hose, length 1200 mm, with connector for compressed air. This hose can be connected to the follower plates for 180 kg – drums and allows to set compressed air pressure under the follower plate when it has reached the low level in order to take it out of the drum again more easily.

131.png

Art. 4309

Metal drum cover, including metal bung adapter and metal counter-ring, suitable for the use of pneumatic grease pumps of series “Power Bull” on 180 kg – drums. Total diameter 600 mm, diameter of bore for suction tube in bung adapter of 50 mm. Suitable for art. nos. 4048 – 4049 – 4050 – 4051 – 4052.

​

Art. 4309/70

Metal drum cover such as art. no. 4309, but including bung adapter with diameter of bore for suction tube of 70 mm. Suitable for art. nos. 4046 and 4047.

132.png

Art. 4320

Follower plate with rubber edge, for applications with pneumatic grease pumps of series “Power Bull” on 180 kg – drums. The follower plate causes a constant grease level inside of the drum and helps to avoid any air pockets inside of the grease close to the suction tube as well as any disposals of grease on the inner surface of the drum. Total diameter of follower plate 590 mm, diameter of metal disc 540 mm, diameter of bore for suction tube 50 mm. Suitable for art. nos. 4048 – 4049 – 4050 – 4051 – 4052.

​

Art. 4320/70

Follower plate such as art. no. 4320, but diameter of bore for suction tube 70 mm. Suitable for art. nos. 4046 and 4047.

133.png
134.png

Art. 4343/50

Metal bung adapter for the fixation of pumps, series “Power Bull”, 2” BSP (M) x 50 mm, on drums. Suitable for art. nos. 4048 – 4049 – 4050 – 4051 – 4052.

Art. 4343/70

Metal bung adapter for fixation of pumps, series “Power Bull”, 2” BSP (M) x 70 mm, on drums. Suitable for art. nos. 4046 and 4047.

Art. 4343/71

Metal lock ring for bung adapter, 2” BSP (M), for art. no. 4343/70.

Art. 4342/50

Metal flange plate for fixation of pumps, series “Power Bull”, with suction tube diameter 50 mm, without bung adapter. Suitable for art. nos. 4048 – 4049 – 4050 – 4051 – 4052.

Art. 4342/70

Metal flange plate for fixation of pumps, series “Power Bull”, with suction tube diameter 70 mm, without bung adapter. Suitable for art. nos. 4046 and 4047.

bottom of page